Top 3 Automotive Key Programmer Review 2021: Most Selling and Competitive ones

 This article will give customers the answers on how to choose the best car key programmer. There are a variety of car key programmers on the market that makes choosing quite challenging. This is because you have to select a key programmer that is compatible with your vehicle, and it should carry out the functions you want. What’s more, a perfect OBD2 key programmer should be upgradable so that you can use it on the latest vehicles.

To simplify your work easier, we’ve listed some of the best car key programmers on the market. The devices that we’ve selected not only offer key programming functions but as well as OBD2 diagnostic functions. Therefore, you get so much more than just programming your vehicle.

1.Autel MaxiM IM608 Professional Key Programmer

The Autel MaximM IM608 Professional Key Programming tool is one of the most advanced OBD2 key programming tools on the market. This unit combines advanced key programming, all systems diagnostics, and advanced services. Besides, it runs on a powerful Cortex-A9 processor that delivers fast and reliable results. And with a large LCD touchscreen, reading results is made super easy.

Technical Specification Chart to Show More Details:

Features/Functions	Autel MaxiM IM608
Display screen	7”1024×600 LCD capacitive touchscreen
Storage	reliable 32GB Memory
Processor	Powerful Cortex-A9 processor
Combination of key programming/all system diagnostics/advanced maintenance services	YES
Smart Mode	for guided and automated key learning
Android Operating System	for fast boot-up and multitasking
Expert Mode	for advanced key learning
Read PIN/CS	Yes all key lost
Warranty	1 year
Dimensions	11.81 x 8.66 x 1.97 inches
OE level diagnostics	more than 80 US, Asian and European makes and models
Advanced maintenance services	including EPB, DPF, SAS, Oil reset, BMS and TPMS sensor ID relearn
Transponder read/write, EEPROM/MCU read/write	YES
Weight	15.47 pounds

The device is fitted with XP400 key programmer and MaxiFlash ECU programmer to ensure that there complete coverage of IMMO and programming functions. Aside from advanced functions, the unit also provides all special functions, such as Oil reset, EPB, SAS, BMS, TPS Sensor ID relearn, SAS, and much more. On top of that, it can read PIN/CS, key learning, remote learning, and key generation. Thus, Autel IM606 one of the best car key programmer tool.

What stands out from other high-end key programmers is that it is compatible with at least 80 vehicle makes and models from the U.S, Asia, and Europe. With the smart mode and expert mode options, this device can be utilized by both expert and DIY enthusiasts without any challenge.

2.Launch X431 V+ Full System Scanner

The launch is another top diagnostic brand. The Launch X431 V+ full system scanner is another exceptional car key programmer on the market. Featuring a large 10.1-inch screen, this unit can display 15 data streams, and it is evident. It also runs on Android 9.0, with 8-core 1, making it fast and reliable in performance. What makes the Launch X431 V+ diagnostic scanner unique is the 7000mAh rechargeable battery. It provides the device with up to 8 hours of runtime, which is critical for professional technicians.

Technical Specification Chart to Show More Details:

Features/Functions	Launch X431 V+
Works	Over 68 car brands and 220 car models from America, Europe, Asia
Operating System	Android
Wifi,Bluetooth	YES
Main Brands	Skoda, Opel, Citroen, Porsche, Rover, Audi, Chrysler, Dodge, Jeep, Acura, Lexus, Honda, Ford, Nissan, Lincoln, Mazda, etc
Check Engine Light	YES
View Live Data	YES
Active Test	YES
View Freeze Frame	YES
Oil Reset Service	YES
Tooth Learning/Anti-theft Matching	YES
ABS,SRS, Body control module	YES
Battery Register /Battery Maintenance	YES
Software Update Option	Yes, 2-Years Free Update
Warranty	5-year warranty

Apart from key programming, the device also performs active tests, ECU coding, service functions, matching, initialization, adaptation, relearn, Auto Vin Identification, and injector coding. Like a code reader, the OBD2 key programmer can also carry out service functions such as TPMS, IMMO, Oil, Brake, SAS, ABS Bleed, BMS, etc. If you want the best car key programmer tool at an affordable price, buy this.

The Launch X431 V+ key programmer works with up to 150 car brands and 1000 car models. The user has the opportunity to select from one of the 24 languages the device comes with. On top of that, it comes with 2-years free updates and a 5-year warranty.

 

3.Autel MaxiCom MK808 Scanner

Mechanics and technicians trust Autel scanners and key programmers for a reason. They are reliable, perform a wide range of functions, and cover various car makes and models. That’s why we’ve featured many Autel key programmers on this list. The Autel MaxiCom MK808 OBDII scanner is not an exception.

Technical Specification Chart to Show More Details:

Features/Functions	Autel MaxiCom MK808
Works	All 1996 US-based, 2000 EU-based and newer cars
Display Screen	7＂ LCD Touchscreen
Operating System	Android
Processor	Cortex-A9 processor (1.5 GHz)
ABS,SRS,EPB,BMS,SAS,DPF	YES
Live data	YES
Views freeze frame data	YES
Oil Reset	YES
Get transmission codes	YES
Update option	12-month free updates
Check Engine Light	YES
Reading/Clearing codes	YES
Shop Manager / Data Manager	YES
Batteries	One Lithium Polymer batteries required.(included)
Vehicle Coverage	Acura, Audi, Benz, Bmw, Bugatti, Auford, Bentley, Chevrolet, Chrysler, Gm, Holden, Euford, Ford, Honda, Hyundai, Land Rover, Infiniti, Kia, Isuzu, Jaguar, Lexus, Maybach, Mitsubishi, Mini, Nissan, Mazda, Opel, Porsche, Seat, Skoda, Saab, Scion, Smart, Sprinter, Subaru, Vauxhall, Toyota, Volvo, Suzuki, Vw etc.
Weight	5.65 pounds
Warranty	One year warranty

This is the latest Autel MaxiCom MK808 version. The car key programmer performs brake bleed, injector test, Immo keys, throttle reset, EPB reset, oil reset, TPMS, PDF, etc. On top of that, you can use it to diagnose basic OBDII functions so that your car is secure from thieves and safe for driving.

The Autel MaxiCom MK808 OBDII car scanner and the programmer has a user-friendly interface, which even DIY-enthusiasts will have an easy time utilizing. The device is also compact for easy storage and use. With the ability to work with most 1996 and newer OBD2 compliant vehicles, this device can diagnose different car makes and models. You can update it for free for a full year.

Autel MaxiM IM608, Launch X431 V+ and Autel MaxiCom MK808 are all competitive key programmers on the market, but we can’t say which one is better only by those technical specifications. Depending on different needs of the users, pick up the one that suits you best.

Autel MaxiM IM608 purchase link:

https://www.cardiagtool.co.uk/autel-maxiim-im608-plus-xp400-pro.html

Launch X431 V+ purchase link:

https://www.cardiagtool.co.uk/launch-x431-v-plus-wifi-bluetooth-scanner.html

Autel MaxiCom MK808 purchase link:

https://www.cardiagtool.co.uk/autel-maxicom-mk808-diagnostic-tool.html

That's all. Thank you for sharing your time with us!

Don't forget to contact us at:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Or leave a message at https://www.cardiagtool.co.uk/

to tell us what suggestions or questions you have about our products.

Source:http://blog.cardiagtool.co.uk/top-3-automotive-key-programmer-review-2021-most-selling-and-competitive-ones/

Autel MaxiSys Tablet Series “SD Card Full” Factory Reset Solution

 Many customers prefers to buy the Autel MaxiSys Tablet Series like the Autel MaxiSys MS906BT, Autel MaxiSys Elite and Autel MaxiSys MS908S Pro because of their powerful diagnostic functions, reliable user experience, advanced hardware and stable software usage.

But many customer would face such a situation where the unit screen prompts “Insufficient space on SD card. Please clear the SD card space” when trying to download the new car model and software.

So this article will guide you guys how to tackle this issue with one of the most useful ways. Using this method means to completely wipe out of tool. It’s going to delete everything off of the tool including any photos, any customer information, any of your history records that you have on the tool. That means you have to do the backup of the data that you wish to restore.

The method of this article recommended is to reset your tablet back to factory spec and this can be used for many different times in many different ways.

Specific Operation Procedures:

Click on the “Home” button<< “Maxi Tools”

On “Maxi Tools”, you’re going to see a button that says GC.

THIS IS going through the process of just wiping out some of the temporary folders, trying to freshen stuff up and clean some stuff up.

This will delete the vehicles but it won’t delete them all the way. This is more for cleaning the extra stuff of the temporary files from your internet, the pictures, the videos, that kind of thing.

But that’s not the exact solution that we are going to teach you guys in this article.

Move back to “Home” screen>> Select “System Settings”>> Scroll down the left sidebar and click “Reset” button

You are gonna see the “Factory data reset” on the top. Click on it and enter into an interface that gives you the explanation of what kind of internal files (or data) will be deleted.

We want to erase the SD card because that is the internal memory on the tool.

So select “Erase SD card”>> “Reset Tablet”

You’re gonna get a warning on your tablet that this move will erase everything on your tablet, including all cars, all manufacturers, everything, just like this came out of the box from the factory.

Please do keep this in your mind:

If you are not under update contract, you will not be able to recover this information, leading to information forever deletion.

So make sure you’re under update contract before doing this process.

Let’s go ahead to click “Erase everything” to completely wipe out the tool.

Now we’ve done the complete reset on the tool. Whenever we go back into the Mac Cesis application you’re going to that it says an Internet connection is required because we have completely deleted everything out of the tool.

So let’s go ahead and set up or Internet connection by holding down on the Wi-Fi.

Enter the Wifi password to finish the connection.

Go back over to the “Home” screen again<< Click on “Diagnostics”

You will see that all the vehicles and their history downloaded record are gone.

All right. That’s click on “Settings” menu and scroll down to choose the “Storage” option.

The storage level becomes 27.7 G available out of the 32G.

Feel so happy to have lots of room to start over.

Now you can start to download the software of diagnostic or TPMS that you wish to update into the tool, not selecting all of them, just based on your personal needs.

Good luck to you guys!

https://www.cardiagtool.co.uk/

OBDSTAR X300 DP Plus with Key SIM All Keys Lost for TOYOTA/LEXUS

 OBDSTAR X300 DP Plus, as the upgrade version different from X300 DP PAD, has Built-in VCI Box which can help make communication more stable, totally no worry to lose VCI on your cars ever.

Powerful enough as it is to work with OBDSTAR Key SIM 5 In 1 Key Simulator, it can generate simulate card and add smart keys whenever you want, especially in the all keys lost situation. You will find it worthwhile to put your money on these tools.

Next, let’s come to check more details of X300 DP PLUS.

Software advantages in IMMO: 1. EEPROM    2. Renew Key    3. Key programming    4. Remote programming

With special features like Switch Activation Function, ECU Clone(Now only for Volvo/GM/Peugeot/Citroen and we are adding more car models.

With special functions like TPS/ABS/EPB/DPF/TPMS/SRS Reset, Fuel Injector, Gear Learning, Battery Matching, ECU Programming, Throttle Matching, Oil/service reset, Steering Angle Reset/Remote Manual Setting, Electronic Steering Reset, CVT Learning/value Reset.

All those stuff concerning with this tool deserves your attention！

All right. Let’s get right to the focus of this tech article.

 

How to use OBDSTAR X300 DP PLUS to generate simulated card?

Please refer to test report about OBDSTAR X300 DP Plus makes simulator key for Toyota A8 type all keys lost via Key SIM.

Before operation, update OBDSTAR X300 DP/ X300 DP Plus / X300 Pro4 TOYOTA to the newest version.

Connect X300 DP Plus with the Toyota vehicle

Select IMMO-> Asia TOYOTA LEXUS-> TOYOTA/LEXUS V32.36-> Manual Select system-> PROXIMITY-> TYPE 5 (ALL Smart KEYS LOST)

Step 1: Read EEPROM

Read the on-screen instruction -> read out the original EEPROM data and backup

Step 2: Make simulated card

Select “Make Simulated Card” and ensure the internet connection is normal.

Read the function instruction carefully can make sure the simulated card is fully charged.

Select the vehicle EEPROM data has been saved in step 1 and press “Enter” to continue

Confirm you have a Key SIM simulated card in hand and connect it to X300 DP Plus

It will generate the A8-type simulated card in 1 or 2 minutes.

Generate the simulated card successfully

Then put the OBDSTRA Key SIM close to the start button of the car and try to light the meter.

When starting the car, ensure to stamp down on the brake pedal, and at the same time, press the ignition switch of the car. Very important stuff!

If the dashboard displays successfully like the below picture, that declares the victory of this operation. Congratulations！

Note: If you can light up the meter normally, use the simulated card instead of the original car key for the [Add Smart Key] operation

Two purchase link I would recommend in Cardiagtool UK ESHOP:

https://www.cardiagtool.co.uk/obdstar-x300-dp-plus-full-version.html

https://www.cardiagtool.co.uk/obdstar-key-sim-5-in-1-key-simulator.html

Thanks for sharing your time with us.

Where Can Users Get Foxwell GT60 Most Detailed “Settings” Application?

 Yes! Here it is the most detailed Foxwell GT60 “Settings” Application.

This tech article aims to illustrate how to perform “Settings” of Foxwell GT60 Diagnostic Platform to meet customers’ specific needs. When Settings application is selected, a menu with available service options displays. Menu options Mainly include:

<1> Unit

<2> Language

<3> Push Message

<4>Automatic Update

<5> Uninstall Vehicle Software

<6> Print Settings

Let’s move on to learn the specific settings of each part.

 How to Change Units?

Selecting Unit opens a dialog box that allows you to choose between

Imperial customary or metric units of measure.

To change the unit setup:

1. Press Settings from home screen of the GT60 diagnostic application.
2. Press Unit and available unit system display.
3. Select a unit system.

How to select proper language?

Select Language opens a screen that allows you to choose system

language.

Got the steps to configure system language:

1. Press Settings from home screen of the GT60 diagnostic application and

select Language. Then all available language options display.

2. Select your preferred language and click Yes to confirm.

What can Push Message do?

This option allows you to enable/disable Push Message function. Software

updates and technical information will be delivered to you automatically. It is

highly recommended to enable it all the time, so you won’t miss out any new

updates from Foxwell.

Got the Steps to enable/disable Push Message:

1. Press Settings from home screen of the GT60 diagnostic application.
2. Click the button on the right side. If turned to green, the Push Message

function is enabled. If turned to grey, the function is disabled.

How to enable/disable automatic update notice?

This option allows you to enable/disable automatic update notice. If it is

enabled, an orange update mark will show on the upper right of the diagnostic

software icon whenever there is a new version available.

How to Uninstall Vehicle Software?

This option allows you to uninstall the vehicle software installed in the

scanner.

Got the steps to uninstall a vehicle software:

1. Tap Settings application on home screen of GT60.
2. Tap the Uninstall Vehicle Software option on the option list.
3. Choose the vehicle software you want to delete or choose Select All.

4. Press Cancel to quit or and press OK to uninstall.

How to start good Print Settings?

This option allows you to print any data or information anywhere and anytime

either via PC network or Wi-Fi.

Got the steps to setup the printer connection:

1. Tap the Settings application on home screen of GT60.
2. Tap the Printing Settings option on the option list.

3. Tap Print Plugin Manager and turn on the Mopria Print Service, then

GT60 will search for available printers automatically.

 

4. Choose the right printer.

5. Choose the file or report you want to print and press the print icon

All right, last but not least, let’s see two important messages:

1. Please make sure the printer and the GT60 in the same Wi-Fi or Network

when printing.

2. If Mopria Print Service driver can’t workable for your printer, please

download the driver to work for your printer on Print Service Manager.

Thanks for reading, so much for today!

Any questions, please don't hesitate to contact us:

Email:  sales@CarDiagTool.co.uk
Skype: cardiag.co.uk
Whatsapp: +86 15002705698

Why Customers Choose to Purchase Autel MX Sensor ?

 Autel MX Sensor can work hand in hand with Autel’s easy-to-use TPMS tools, for example, the Autel MaxiTPMS TS501 and TS601, that not only program it but also offer complete TPMS system diagnostics as well as on-tool service procedures.

MX Sensor is 100% ID clone-able with no relearn required and offer latest model vehicle coverage due to the quickly-update during installation with an Autel wireless programming tool.

This article will mainly talk about the the benefits of Autel MX Sensor and make an overall objective review of this Autel TPMS tools, hoping to provide valuable references for the customers when making choice on purchasing them.

First, let’s start with coverage.

The Autel MX Sensor can be programmed to replace 99 percent of the TPMS sensors on today’s vehicles, so that’s one part of number to service, nearly every TPMS equipped vehicle your shops will see. One sensor for multiple applications simplifies the part selection process and expedites vehicle service. Autel’s MX Sensor is a programmable universal sensor that can emulate both 315 MHZ and 433 MHZ frequencies. It can replace the OEM sensors on TPMS equipped domestic Asian and European vehicles.

Its unique press release valve stem system allows for both rubber and aluminum valve stems to be used interchangeably without any tools.

 

It offers replacement valves in rubber and aluminum. The aluminum stems are available in several colors for a more custom look. So even the most discerning customer will be happy to have this sensor.

Next is consistent quality.

The Autel MX Sensor is developed and tested to meet SAE standards. You can be confident that every MX Sensor meets or exceeds OE sensor durability.

We individually test and serialize each one before it leaves the factory, even under extreme weather and driving conditions, it’s still very reliable.

Then is the Service Efficiency.

No matter what vehicles comes through your bay door when using the Autel MX Sensor, you can be confident that you can service it and get it out of the shop quickly. No waiting to hear from your parts supplier if he has a direct fit sensor for the vehicle or when he might be able to get one to your shop. It’s simple using the MX Sensor increases the number of vehicles you can service daily. Autel TPMS tools are designed to enable technicians at every level to complete TPMS service with efficiency and ease.

The final one is the advantage.

The Autel MX Sensor is a quality sensor with 99% of vehicle coverage that meets or exceeds OE sensor durability and functionality and price lower than most aftermarket sensors. It’s such a TPMS sensor with exceptional value, quality and coverage that defeat the other similar sensor products of different brands.

Thanks so  much for reading!

For more information about Autel TPMS Tools, please check:

https://www.cardiagtool.co.uk/autel-mx-sensor-433-315-mhz-tpms-sensor.html

For suggestions and questions about our products, please contact us:

Email: sales@CarDiagTool.co.uk
Skype:cardiag.co.uk
Whatsapp:+86 15002705698

Super MB Star C3 Top Version Updated Software By Internet Best Quality 2015.05

Super Mb star BENZ STAR C3 Star diagnosis updated by internet

Buy it for 5 reasons:

1 Version:

DELL:2015.05
T30:2014.05
External HDD: 2015.05

2 Online Update,Free update for one year,after one year,50USD for once, 300USD for a year!

After you get charged ,please update within 24 hours ,or it may be invalid.

3 Multi-Language: English, French, Croatian, Italian, Japanese, Russian, Spanish, Czech, Danish, Dutch, Finish,  Greek, Hungarian, Korean, Polish, Portuguese, Romanian, Swedish, Turkish, Chinese

4 Best C3 benz tool:Diagnose,ecu prorgammer.

5 Top version HDD,has more Permissions.

 

Description

Super MB STAR is one of the best after-market tools for Bens diagnostic, coding/programming in the world, it is also an up-to-date tool for online upgrade directly, work with any laptops, compatible with Windows7/XP operation system, software including Xentry for new released C204/ C205/ CLA117/ GLC156/ E207/ E212, ect., which are able to work with Benz cars, trucks, Sprinters, Vans, Smart, Cobus, FUSO, BHARATBENZ, FOTON, etc.

 

New Super MB STAR Net released Internal HDD software fit for Lenovo Series (X61T, X60, T60, T61, T400, E420, E430, etc.) HP Series, Dell Series (D630, D620, E6420, E6430, etc.) Toshiba Series, Fujin Series.

 

New features of Super MB Star (Top version HDD,has more Permissions.)
 

- Password Letter verification of your Super MB STAR Online

- No need to active EPC/WIS any more, double click the icon then use it

- New cars of C-Class 205, CLA117, GLC156, B 246, CLS 218, SLK172, BHARATBENZ, CLC 171, etc., are released in this version

- Online SCN Coding/offline SCN Coding/offline coding are all available with this new version

- New function WIS and EPC DATACARD is added

- The car PL67 (01-2013 Version) is added to Benz price list

- Online updater client platform STAR Updater for users’ easier upgrade.

- Support the hardware quick self-test and the software to be quickly recovery

- FDOK Key Calculator (Top version only)

- Adjust truck Speed Limitation function (Top version only)

- SBC Reset function (Top version only)

- TV Activation function (Top version only)

- DPF Regeneration (Top version only)

- No need password when you choose special function in DAS of W204 (Top version only)

- Start HHT Win from desktop icon directly, no need start from DAS.

- Offline Coding key provide service. (Top version only)

Product Software Include

 

DAS: the automatically Diagnosis Assistance System

WIS.net: Workshop Information System

EPC.net: Electronic Parts Catalog

ST Finder: Part location finder

STARUTILITIES: the movement management system and self-test

PL 67: Price List tool to find out how much price by input the parts number

Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars.

Smart TAN Code: Opened special function in DAS program with Smart cars 450/451/452/454, even with the new type smart

Developer model: Engineer mode, remove limitations and open more Special functions.

Benz Disassembly system: Video lessons to teach you how to remove each part from Benz cars with details order steps.
 

Product Hardware Include

 

- Multiplexer: Super MB STAR Diagnostic interface

- OBDII 16Pin: For cars with OBDII port

- Sprinter 14Pin: For sprinter cars or some vans

- 38Pin Cable: For old Benz cars with 38 Pin port

- 4Pin Cable: For old Benz cars fit for 4 Pin port

- RS232 To RS485 Serial Cable: Connect Multiplexer to PC/Laptop

- Mobile HDD with USB Cable: with all the software per-installed work with any laptops by USB

- USB KEY: Security USB Encryption

- Verification Letter with Password inside: Used for verify the Super MB STAR and upgrade password.

- PCMCIA or Express Card: Used for laptop without serial port
 

 

PCM board:

Package List:

 

1pc* obdii 16pin

1pc* usb cable

1pc* express to rs232 card

1pc* multiplexer

1pc* rs232 to rs485 cable

1pc* verification letter

1pc* 14pin cable

1pc* 38pin cable

1pc* driver for express

1pc* driver for pcmcia

1pc* pcmcia to rs232 card

1pc* usb key

1pc* 4pin cable

1pc* Top Hdd